[1]张清霄,张卫红,曹佰顺.Ni-P 和 Ni-P-SiC 化学镀层的结构和性能[J].郑州大学学报(工学版),1998,19(03):51-54.
　Zhang Qingxiao,Zhang Weihong,Cao Baishun.The structure and performance of Ni-P and NI-P-SIC chemical plating[J].Journal of Zhengzhou University (Engineering Science),1998,19(03):51-54.
点击复制

Ni-P 和 Ni-P-SiC 化学镀层的结构和性能()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
19卷
期数:
1998年03期
页码:
51-54
栏目:
出版日期:
1998-12-01

文章信息/Info

Title:
The structure and performance of Ni-P and NI-P-SIC chemical plating
作者:
张清霄; 张卫红; 曹佰顺
郑州工业大学机械系,郑州工业大学材料系,郑州市计划委员会
Author(s):
Zhang Qingxiao;  Zhang Weihong;  Cao Baishun
Department of Machinery Department of Zhengzhou University of Technology, Department of Materials, Zhengzhou University of Technology, Zhengzhou City Planning Committee
关键词:
化学镀层; Ni－P; Ni－P－SiC; 结构; 性能
Keywords:
Chemical coating;  NI -P;  NI -P -SIC;  structure;  performance
文献标志码:
A
摘要:
首先研究了热处理温度对Ｎｉ－Ｐ，Ｎｉ－Ｐ－ＳｉＣ化学镀层结构和硬度的影响，然后系统研究了ＳｉＣ颗粒粒度及浓度对Ｎｉ－Ｐ－ＳｉＣ镀层显微硬度的影响。用ＸＲＤ测定了镀层结构，用金相显微镜观察了镀层组织。结果表明，加入ＳｉＣ能增加Ｎｉ－Ｐ镀层的显微硬度。两种镀层经４００℃热处理后显微硬度均达到最大值。４００℃热处理后，Ｎｉ－Ｐ－ＳｉＣ镀层硬度随ＳｉＣ浓度增加而单调增加，随ＳｉＣ粒径的变化有一最大值。
Abstract:
Firstly, the effect of thermal treatment temperature on Ni -P, Ni -P -SIC chemical coating structure and hardness, and then systematically studied the effects of SIC particle size and concentration on the microscopic hardness of Ni -P -SIC coating. The plating structure was determined with XRD, and the coating tissue was observed with golden microscope. The results show that adding SIC can increase the microscopic hardness of NI -P coating. After the two plated layers are treated with 400 ° C, the micro -hardness reaches the maximum value. After 400 ° C thermal treatment, the hardness of the NI -P -SIC coating increases with the increase of SIC concentration, and the monotonous is increased, and it has a maximum value with the changes in SIC particle size.
更新日期/Last Update: 1900-01-01