[1]李先强,李剑锋,丁传贤,等.等离子喷涂复合陶瓷涂层及其耐磨性能[J].郑州大学学报(工学版),1996,17(02):12-17.
　Li Xianqiang,Li Jianfeng,Ding Chuanxian,et al.Plasma spray composite ceramic coating and its wear resistance[J].Journal of Zhengzhou University (Engineering Science),1996,17(02):12-17.
点击复制

等离子喷涂复合陶瓷涂层及其耐磨性能()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
17卷
期数:
1996年02期
页码:
12-17
栏目:
出版日期:
1996-02-28

文章信息/Info

Title:
Plasma spray composite ceramic coating and its wear resistance
作者:
李先强; 李剑锋; 丁传贤; 章宗城; 张平余
中国纺织大学，中国科学院上海硅酸盐研究所，中国科学院兰州化学物理研究所
Author(s):
Li Xianqiang;  Li Jianfeng;  Ding Chuanxian;  Zhang Zongcheng;  Zhang Pingyu
China Textile University, Shanghai Institute of Silicate, Chinese Academy of Sciences, Institute of Lanzhou Chemical Physics, Chinese Academy of Sciences
关键词:
等离子喷涂; 复合陶瓷涂层; 摩擦磨损
Keywords:
Plasma spray;  composite ceramic coating;  friction and wear
文献标志码:
A
摘要:
用等离子喷涂技术制取了ＭＯ＋Ａｌ２Ｏ３－ＴｉＯ２、ＭＯＳ２＋Ａｌ２Ｏ３、ＴｉＯ２＋Ｃｒ３Ｃ２ＮｉＣｒ和ＭｏＳ２＋Ｃｒ３Ｃ２－ＮｉＣｒ复合涂层．利用ＳＥＭ、ＸＲＤ、和ＸＰＳ等技术．观察和分析了涂层的显微结构和喷涂过程中的物相变化及添加成分对涂层耐磨性能的影响．在ＭＭ－２００型磨损试验机上测定了涂层的滑动摩擦系数和磨损率．结果表明；Ｍｏ、ＭｏＳ２与Ａｌ２Ｏ３－ＴｉＯ２的结合性能较好，ＴｉＯ２、ＭｏＳ２在Ｃｒ３Ｃ２－ＮｉＣｒ涂层的气孔和裂纹处偏聚；添加ＭｏＳ２对Ａｌ２Ｏ３－ＴｉＯ２涂层的物相组成有明显的影响；适
Abstract:
MO + AL2O3 -TIO2, MOS2 + Al2O3, TIO2 + CR3C2Nicr and MOS2 + CR3C2 -NICR composite coating were used to use plasma spraying technology. Use SEM, XRD, and XPS. Observe and analyze the impact of the change in the microcontroller of the coating and the phase change in the spraying process and the effect of adding ingredients on the wear resistance of the coating. The sliding friction coefficient and wear rate of the coating are determined on the MM -200 trials. The results show that the binding performance of MO, MOS2 and Al2O3 -TIO2 is better. The TIO2 and MOS2 are partially converged at the pores and cracks of the CR3C2 -NICR coating; the addition of MOS2 on Al2O3 -TIO2 coating has a significant effect; appropriate amount of MO and MOS2 add to Al2 to Al2. In O3 -TIO2, the friction coefficient and wear rate of the coating can be reduced; and TIO2 and MOS2 add to CR3C2 -Nicr, which has little effect on the friction and wear performance of the coating

相似文献/References:

[1]汤文博,李永刚,徐继达..冲蚀条件下等离子喷涂Al2O3陶瓷涂层的磨损特性[J].郑州大学学报(工学版),2002,23(01):39.[doi:10.3969/j.issn.1671-6833.2002.01.011]
　Tang Wenbo,LI Yonggang,Xu Jida.Wear characteristics of plasma sprayed Al2O3 ceramic coating under erosion conditions[J].Journal of Zhengzhou University (Engineering Science),2002,23(02):39.[doi:10.3969/j.issn.1671-6833.2002.01.011]
[2]李剑锋,李先强,丁传贤,等.碳化铬-镍铬涂层对几种陶瓷的滑动摩擦磨损[J].郑州大学学报(工学版),1997,18(01):19.
　Li Jianfeng,Li Xianqiang,Ding Chuanxian,et al.Chromium carbide-nickel-chromium coating for several types of ceramics and friction and rubbing[J].Journal of Zhengzhou University (Engineering Science),1997,18(02):19.

更新日期/Last Update: 1900-01-01