[1]刘春太,陈静波,王利霞,等.注射成型CAE技术的研究进展和发展趋势[J].郑州大学学报(工学版),1996,17(01):118-121.
　Liu Chun,Chen Jingbo,Wang Lixia,et al.Research progress and development trend of injection molding CAE technology[J].Journal of Zhengzhou University (Engineering Science),1996,17(01):118-121.
点击复制

注射成型CAE技术的研究进展和发展趋势()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
17卷
期数:
1996年01期
页码:
118-121
栏目:
出版日期:
1996-01-28

文章信息/Info

Title:
Research progress and development trend of injection molding CAE technology
作者:
刘春太; 陈静波; 王利霞; 申长雨
国家橡塑模具工程研究中心
Author(s):
Liu Chun;  Chen Jingbo;  Wang Lixia;  Shen Changyu
National Rubber Plastic Mold Engineering Research Center
关键词:
注射成型; CAE技术; 成型模拟; 注塑模具
Keywords:
Injecting molding;  CAE technology;  mold simulation;  injection molding mold
文献标志码:
A
摘要:
本文从注射成型ＣＡＥ技术的工程背景和研究特点出发．简要介绍了此技术的主要内容和重点。主要评述了国内外学者所关注的一些基本理论问题和研究方法．讨论了该领域今后可能的发展趋势．
Abstract:
This article starts from the engineering background and research characteristics of the injection molding CAE technology. Briefly introduced the main content and priorities of this technology. It mainly commented on some basic theoretical issues and research methods that scholars at home and abroad. Discuss the possible development trends in the field in the future.

相似文献/References:

[1]王利霞,刘春太,刘晓峰,等.注塑模流动分析[J].郑州大学学报(工学版),1995,16(02):104.
　Wang Lixia,Liu Chun,Liu Xiaofeng,et al.Injection mold flow analysis[J].Journal of Zhengzhou University (Engineering Science),1995,16(01):104.

更新日期/Last Update: 1900-01-01