[1]徐江锋.(t1/t 1/2)/s——诊断系统的模型及优化设计[J].郑州大学学报(工学版),1993,14(02):7-14.
 Xu Jiangfeng,(T1/T 1/2)/S -Model and optimized design of the diagnostic system[J].Journal of Zhengzhou University (Engineering Science),1993,14(02):7-14.
点击复制

(t1/t 1/2)/s——诊断系统的模型及优化设计()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
14卷
期数:
1993年02期
页码:
7-14
栏目:
出版日期:
1993-06-28

文章信息/Info

Title:
(T1/T 1/2)/S -Model and optimized design of the diagnostic system
作者:
徐江锋;
郑州工学院计自系,
Author(s):
Xu Jiangfeng;
Zhengzhou Institute of Technology
关键词:
由于计算机技术的迅速发展故障诊断理论已运用到了许多计算机系统中以便提高系统的可靠性。本文在黄/陈诊断模型的基础上提出了一个更实际的三值诊断模型并在此模型下给出了一种新的故障诊断策略—(t1/t_2~1)/s—可诊断最后又着重研究了该系统的优化系统D_(1A)。研究结果表明(t1/t_2~1)/s—可诊断系统与t(=t_1+t1/2)/s—可诊新系统相比。要少用近一半的测试边与t—可诊断系统相比要少用近四分之三的测试边。
Keywords:
System diagnosis three values ​​logic D_ (1A) system
文献标志码:
A
摘要:
系统诊断;;三值逻辑;;D_(1A)系统
Abstract:
Due to the rapid development of computer technology, the theory of fault diagnosis has been used in many computer systems to improve the reliability of the system. On the basis of the yellow/Chen diagnostic model, this article proposes a more practical three -value diagnostic model, and gives a new fault diagnosis strategy under this model- (T1/T_2 ~ 1)/s — diagnostic, and finally focuses on the system’s optimized system D_ (1A). The results show that (T1/T_2 ~ 1)/s — the diagnostic system compared with T (= T_1+T1/2)/s — a new system. Use nearly half of the test side, compared with the T -diagnostic system, use nearly three -quarters of the test edges.
更新日期/Last Update: 1900-01-01