[1]李宇.大跨连续梁桥施工膺架的设计研究[J].郑州大学学报(工学版),2016,37(02):77-81.[doi:10.3969/j.issn.1671-6833.201505033]
 Li Yu.Research on Optimization Design for Constructive Rack of Long-span continuous beam bridge[J].Journal of Zhengzhou University (Engineering Science),2016,37(02):77-81.[doi:10.3969/j.issn.1671-6833.201505033]
点击复制

大跨连续梁桥施工膺架的设计研究()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
37卷
期数:
2016年02期
页码:
77-81
栏目:
出版日期:
2016-04-18

文章信息/Info

Title:
Research on Optimization Design for Constructive Rack of Long-span continuous beam bridge
作者:
李宇
长安大学公路学院旧桥检测与加固技术交通行业重点试验室,陕西西安,710064
Author(s):
Li Yu
Key Laboratory of Old Bridge Detection and Reinforcement Technology, Highway College, Chang’an University, Xi’an, Shaanxi, 710064 
关键词:
大跨连续梁桥施工膺架设计有限元
Keywords:
DOI:
10.3969/j.issn.1671-6833.201505033
文献标志码:
A
摘要:
以某大跨连续梁桥施工膺架为工程背景,先采用有限元软件对原图纸和荷载方案进行校核,发现其承载能力不足的缺点后,对施工膺架的碗扣支架、贝雷梁、横向支撑梁、钢管立柱进行了设计,并用有限元软件对设计后的施工膺架各个构件进行了强度和稳定性验算.结果表明:在保证造价经济的前提下,设计后的桥梁施工膺架在承载力方面得到很大提高,满足桥梁施工要求.
Abstract:
Taking the construction frame of a long-span continuous girder bridge as the engineering background, the original drawings and load schemes were checked by using finite element software. , horizontal support beams, and steel pipe columns were designed, and the strength and stability of each component of the designed construction frame were checked with finite element software. The results showed that: under the premise of ensuring cost economy, the designed bridge construction frame The bearing capacity has been greatly improved to meet the requirements of bridge construction.
更新日期/Last Update: