[1]郑鹏,雷文平,侯伯杰..基于修正单纯形法的圆柱度误差优化评定[J].郑州大学学报(工学版),2004,25(02):87-90.[doi:10.3969/j.issn.1671-6833.2004.02.021]
　ZHENG Peng,Lei Wenping,Berger Hou.Cylindricity error optimization evaluation based on modified simplex method[J].Journal of Zhengzhou University (Engineering Science),2004,25(02):87-90.[doi:10.3969/j.issn.1671-6833.2004.02.021]

点击复制

基于修正单纯形法的圆柱度误差优化评定()

分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:

25卷

期数:

2004年02期

页码:

87-90

栏目:

出版日期:

1900-01-01

文章信息/Info

Title:

Cylindricity error optimization evaluation based on modified simplex method

作者:

郑鹏; 雷文平; 侯伯杰.

郑州大学机械工程学院,河南,郑州,450002, 郑州大学机械工程学院,河南,郑州,450002, 郑州大学机械工程学院,河南,郑州,450002

Author(s):

ZHENG Peng; Lei Wenping; Berger Hou

关键词:

误差评定;  圆柱度误差;  修正单纯形法

Keywords:

error assessment;  cylindrical error;  Correction of the simplex method

DOI:

10.3969/j.issn.1671-6833.2004.02.021

文献标志码:

A

摘要:

对圆柱度误差评定理论及应用进行了研究,建立了圆柱度误差评定的规划模型,探讨了误差评定的最小条件判据,提出直接求解规划模型的修正单纯形法,并给出了求解的步骤.最后对实际测量数据进行了误差评定,结果证明,该方法有较高的精度和速度.另外,此评定方法具有很强的通用性,对于其它形状误差的求解提供参考.

Abstract:

The theory and application of cylindrical error evaluation are studied, the planning model of cylindrical error evaluation is established, the minimum condition criterion for error evaluation is discussed, the modified simplex method for directly solving the programming model is proposed, and the steps of solving it are given. Finally, the error evaluation of the actual measurement data is carried out, and the results show that the method has high accuracy and speed. In addition, this evaluation method has strong versatility and provides a reference for solving other shape errors.

常用功能