[1]王克文,姜俊峰,刘宪林,等.灵敏度指标在10 kV配电线路无功补偿中的应用[J].郑州大学学报(工学版),2002,23(03):70-74.[doi:10.3969/j.issn.1671-6833.2002.03.019]
　KEWEN WANG,JIANG Junfeng,LIU Xianlin,et al.Application of sensitivity index in reactive power compensation of 10 kV distribution line[J].Journal of Zhengzhou University (Engineering Science),2002,23(03):70-74.[doi:10.3969/j.issn.1671-6833.2002.03.019]

点击复制

灵敏度指标在10 kV配电线路无功补偿中的应用()

分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:

23卷

期数:

2002年03期

页码:

70-74

栏目:

出版日期:

1900-01-01

文章信息/Info

Title:

Application of sensitivity index in reactive power compensation of 10 kV distribution line

作者:

王克文; 姜俊峰; 刘宪林; 等.

郑州大学电气工程学院,河南,郑州,450002, 驻马店电力设计所,河南,驻马店,463000

Author(s):

KEWEN WANG; JIANG Junfeng; LIU Xianlin; etc

关键词:

配电线路;  灵敏度;  无功补偿;  并联电容器

Keywords:

distribution lines;  sensitivity;  reactive power compensation;  Shunt capacitors

DOI:

10.3969/j.issn.1671-6833.2002.03.019

文献标志码:

A

摘要:

针对电力系统10 kV配电线路的具体特点,采用灵敏度分析技术进行无功补偿计算.从实际应用角度,描述了优化问题的构成、电能损耗和电压分布的计算,以及对负荷形状系数的处理;详细介绍了灵敏度系数的计算、应用和无功补偿最终方案的确定;在对几十条实际 10 kV线路计算的基础上进行了说明、分析和讨论;利用经济性目标函数对节点无功注入的灵敏度,对各可选点的补偿效果进行预估和排序,然后仅对有限的方案进行准确试算;在计及电容器实际容量、组别的基础上完成10 kV配电线路电容器定位及最佳补偿量的确定.

Abstract:

According to the specific characteristics of the 10 kV distribution line of the power system, the sensitivity analysis technique is used to calculate the reactive power compensation. From the perspective of practical application, the composition of optimization problems, the calculation of power loss and voltage distribution, and the treatment of load shape coefficient are described. The calculation and application of sensitivity coefficient and the determination of the final scheme of reactive power compensation are introduced in detail. Based on the calculation of dozens of actual 10 kV lines, it is explained, analyzed and discussed. The sensitivity of the reactive power injection of the node is estimated and ranked by using the economic objective function, and then the accurate trial calculation is only for a limited number of schemes. The positioning of the capacitor in the 10 kV distribution line and the determination of the optimal compensation amount are completed on the basis of considering the actual capacity and group of the capacitor.

常用功能