[1]李海梅,申长雨,陈静波,等.粘弹性本构关系在注塑模CAE中的应用[J].郑州大学学报(工学版),1999,20(02):12-14.[doi:10.3969/j.issn.1671-6833.1999.02.004]
　Li Haimei,Shen Changyu,CHEN Jingbo,et al.Application of viscoelastic constitutive relationship in injection mold CAE[J].Journal of Zhengzhou University (Engineering Science),1999,20(02):12-14.[doi:10.3969/j.issn.1671-6833.1999.02.004]

点击复制

粘弹性本构关系在注塑模CAE中的应用()

分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:

20卷

期数:

1999年02期

页码:

12-14

栏目:

出版日期:

1999-01-01

文章信息/Info

Title:

Application of viscoelastic constitutive relationship in injection mold CAE

作者:

李海梅; 申长雨; 陈静波; 等.

郑州工业大学橡塑模具国家工程研究中心,河南,郑州 450002

Author(s):

Li Haimei; Shen Changyu; CHEN Jingbo; etc

关键词:

粘弹性;  注塑成型;  注塑模CAE;  本构关系

Keywords:

viscoelasticity;  injection molding;  Injection mold CAE;  Constitutive relations

DOI:

10.3969/j.issn.1671-6833.1999.02.004

文献标志码:

A

摘要:

比较了微分型、积分型粘弹性本构方程的特点,并对二者的等价性进行了证明.对选用的积分型粘弹性本构方程,根据注塑成型的特点进行简化、修正,并推导了其递推公式,便于粘弹性本构关系下有限元计算公式的推导和程序研制,为注塑模CAE中塑件残余应力计算和翘曲变形分析提供了理论基础

Abstract:

The characteristics of differential and integral viscoelastic constitutive equations are compared, and the equivalence of the two is proved. The selected integral viscoelastic constitutive equation is simplified and corrected according to the characteristics of injection molding, and its recursive formula is derived, which is convenient for the derivation and program development of the finite element calculation formula under the viscoelastic constitutive relationship, and provides a theoretical basis for the calculation of residual stress and warpage deformation analysis of plastic parts in injection mold CAE

常用功能