[1]李小民、曹侃、李鹏凯、许珊珊、吴宗全.一种MILD燃烧器的NOx排放性能的关键影响因素分析[J].郑州大学学报(工学版),2021,42(02):106-111.[doi:10.13705/j.issn.1671-6833.2020.06.003]
 Li Xiaomin,Cao Kan,Li Pengkai,et al.Effects of Several Chief Parameters on the NOx Emission of a MILD Burner Firing Biogas[J].Journal of Zhengzhou University (Engineering Science),2021,42(02):106-111.[doi:10.13705/j.issn.1671-6833.2020.06.003]
点击复制

一种MILD燃烧器的NOx排放性能的关键影响因素分析()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
42卷
期数:
2021年02期
页码:
106-111
栏目:
出版日期:
2021-04-12

文章信息/Info

Title:
Effects of Several Chief Parameters on the NOx Emission of a MILD Burner Firing Biogas
作者:
李小民、曹侃、李鹏凯、许珊珊、吴宗全
中原工学院能源与环境学院;
Author(s):
Li Xiaomin; Cao Kan; Li Pengkai; Xu Shanshan; Wu Zongquan;
School of Energy and Environment, Central Plains Institute of Technology;
关键词:
Keywords:
biogas moderate & intense low oxygen dilution combustion rich combustion NOx distributed energy resources
DOI:
10.13705/j.issn.1671-6833.2020.06.003
文献标志码:
A
摘要:
本研究采用富燃-引射-MILD燃烧方案,设计了一种适合小型化应用的生物质气MILD燃烧器。燃烧器设计热功率为100kW,五种工况下,出口烟气NOx含量为0.14~1.12mg/Nm3,可满足我国现行NOx排放标准。随一次生物质气比例增加,引射器出口氧气浓度降低、温度升高。当一次生物质气比例为0.3~0.4时,需采取二次稀释实现MILD燃烧;而大于0.4时则无需进行二次稀释。二元回归得到的实验关联式可较好地解释一次生物质气比例、富燃室传热比例对NOx生成的影响。五种工况下,MILD燃烧室的温差均小于200℃,而传统扩散燃烧的温差大于500℃。将本MILD燃烧器用于直燃热泵发生器或烟管锅炉等小型化场合,对扩大可再生能源利用规模,积极响应国家提倡的分布式能源系统建设等具有重要意义。
Abstract:
An experimental investigation was carried out on a MILD burner firing biogas, which was developed based on the scheme of rich combustion-injection-MILD (moderate & intense low oxygen dilution) combustion. An analysis was conducted to explore effects of primary biogas ratio and heat transfer ratio of rich combustion chamber on NOx emissions of the burner, with thermal input of 100 kW. Results showed that temperature difference in the MILD combustion chamber was less than 200 ℃ and NOx content in its flue gas was in the range of 0.14 and 1.12 mg/m3. When the primary biogas ratio was in the range of 0.3 and 0.4, secondary dilution was indispensable to achieve MILD combustion. However, when the primary biogas ratio was greater than 0.4, MILD combustion could be realized without secondary dilution. Finally, an expression was obtained through binary regression, which could explain influences of the primary biogas ratio and the heat transfer ratio of the rich combustion chamber on NOx emissions to a great degree.

参考文献/References:

[1] 李鹏飞,米建春,DALLY B B,等. MILD燃烧的最新进展和发展趋势[J]. 中国科学:技术科学,2011, 41(2): 135-149.

[2] 崔玉峰,吕煊,徐纲,等. 无焰燃烧模型燃烧室动态特性分析[J]. 中国科学:技术科学, 2010, 40(9): 1044-1051.
[3] WEBER R,SMART J P, KAMP W V.On the (MILD) combustion of gaseous,liquid,and solid fuels in high temperature preheated air[J].Proceedings of the combustion institute, 2005,30(2):2623-2629.
[4] 代朝红,温治,朱宏祥,等. 高温空气燃烧技术的研究现状及发展趋势(上)[J]. 工业加热, 2002(3): 14-18.
[5] 代朝红,温治,朱宏祥,等. 高温空气燃烧技术的研究现状及发展趋势(下)[J]. 工业加热, 2002(4): 11-16.
[6] 黄锦耀,严诗伦,陈朝阳. EGR对二甲醚HCCI发动机燃烧特性的影响[J]. 郑州大学学报(工学版), 2018, 39(1): 24-28.
[7] 蒋绍坚,彭好义.高温空气燃烧新型锅炉及特性分析[J].热能动力工程,2000,15(4):348-351.
[8] TSUJI H,GUPTA A K,HASEGAWA T,et al.High temperature air combustion:from energy conservation to pollution reduction[M]. Boca Raton: CRC Press, 2003.
[9] 孟庆新. 高温空气燃烧技术在隧道窑中的应用分析[J]. 耐火材料,2015, 49(2): 156-160.
[10] 陈小娟,蒋继锐. 无焰燃烧技术在环形套筒窑中的应用[J]. 耐火与石灰,2012, 37(6): 10-12.
[11] 余跃,温治,楼国锋,等. 无焰燃烧技术的研究现状[J]. 金属热处理. 2012, 37(10): 65-70.
[12] 王昆,臧鹏,邢双喜,等. 基于驻涡稳定的无焰燃烧室实验研究[J]. 燃气轮机技术,2014, 27(3): 14-18.
[13] 臧鹏,张克舫,崔玉峰,等. 基于凹腔驻涡的无焰燃烧室数值模拟[J]. 工程热物理学报, 2012, 33(9): 1615-1618.
[14] 毛艳辉,徐纲,房爱兵,等. 燃气轮机无焰燃烧技术的研究进展[J]. 热能动力工程,2011, 26(5): 501-506.
[15] 王爱华,蔡九菊,王连勇,等. 高温空气燃烧技术进展与应用[J]. 中国冶金,2006(8): 1-5.
[16] 王蓓蓓,李雅超,赵盛楠,等. 基于区块链的分布式能源交易关键技术[J]. 电力系统自动化, 2019, 43(14): 53-64.
[17] 韩中合,祁超,向鹏,等. 分布式能源系统效益分析及综合评价[J]. 热力发电,2018, 47(2): 31-36.
[18] 金红光,隋军,徐聪,等. 多能源互补的分布式冷热电联产系统理论与方法研究[J]. 中国电机工程学报,2016, 36(12): 3150-3161.
[19] 刘满平. 我国天然气分布式能源发展的制约因素及政策建议[J]. 中国石油和化工经济分析, 2013(12): 13-16.
[20] 徐建中,邓建玲. 分布式能源定义及其特征[J]. 华电技术, 2014, 36(1): 3-5.
[21] 熊超,程小矛. 分布式能源梯级利用:钢铁工业“十二五”节能的重要方向[J]. 冶金经济与管理, 2011(6): 9-11.

更新日期/Last Update: 2021-05-30