[1]楚留声,崔中敏,张俊峰等.SRC柱-钢梁混合框架抗震性能研究[J].郑州大学学报(工学版),2016,37(03):56.[doi:10.10375/ j.issn. 1671 -6833.2016.03.013]
　CHU Liusheng,CUI Zhongmin,ZHANG Junfeng,et al.Study of the seismic performance of SRC column-steel beam hybrid frame structure[J].Journal of Zhengzhou University (Engineering Science),2016,37(03):56.[doi:10.10375/ j.issn. 1671 -6833.2016.03.013]
点击复制

SRC柱-钢梁混合框架抗震性能研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
37卷
期数:
2016年03期
页码:
56
栏目:
出版日期:
2016-05-10

文章信息/Info

Title:
Study of the seismic performance of SRC column-steel beam hybrid frame structure
文章编号:
TU398
作者:
楚留声 102;  102); font-size: 13px; background-color: rgb(255;  255;  255); font-family: Arial;  Verdana;  sans-serif;">; 崔中敏; 张俊峰等
郑州大学土木工程学院,河南郑州450001
Author(s):
CHU Liusheng; CUI Zhongmin; ZHANG Junfeng; ZHAO Jun
School of Civil Engineering，Zhengzhou University ,Zhengzhou450001 ,China
关键词:
混合框架 ;  SRC柱-钢梁; 抗震性能; 静力非线性分析
Keywords:
hybrid frame; SRC column-steel beam ;  seismic performance ;  static nonlinear analysis
DOI:
10.10375/ j.issn. 1671 -6833.2016.03.013
文献标志码:
A
摘要:
对一棍SRC框架进行静力非线性分析,分析结果与试验吻合较好;在此背景下,通过对两跨三层的SRC柱-钢梁混合框架进行静力非线性分析,研究了SRC柱含钢率和梁柱线刚度比对混合框架抗震性能的影响.结果表明,SRC柱-钢梁底层框架实现了“强柱弱梁”破坏模式,混合框架荷载-位移曲线经历了较长的塑性变形阶段,结构表现出良好的整体延性.随着梁柱线刚度比增加,框架破坏模式逐渐从整体“强柱弱梁”过渡为“强梁弱柱"破坏模式,结构延性下降明显,设计时可取0.3~0.4作为参考的界限梁柱线刚度比.
Abstract:
In this paper,a static nonlinear analysis of SRC frame has been made,and the analytical results agree well with those of the tests. In the same parameter settings,the static nonlinear analysis of a 2-span,3story SRC column-steel beam hybrid frame is then carried out to learn its seismic performance when the steelratio of SRC column and linear stiffiness ratio of beam to column is different.The results show that the bottomstory of SRC column-steel beam hybrid frame achieve the strong column-weak beam failure mode,so the overall structure experienced a long plastic deformation stage and exhibited good ductility. With the increase of thelinear stiffness ratio of beam to column,the failure of hybrid frame gradually turned from the overall"strongcolumn-weak beam”mode into "strong beam-weak column"mode, and the structure ductility reduced Significantly.According to the calculation results,a reference value range 0.3 ~0.4 is suggested for line stiffnessratio of beam to column in SRC column-steel beam hybrid frame design.
更新日期/Last Update: