[1]李广慧,袁波..不同支承体系曲线梁桥的受力性能研究[J].郑州大学学报(工学版),2013,34(06):67-71.[doi:10.3969/j.issn.1671-6833.2013.06.017]
　Ll Guang-hui,YUAN Bo.Study on Mechanical Properties of Curved Girder Bridgewith Different Supporting Systems[J].Journal of Zhengzhou University (Engineering Science),2013,34(06):67-71.[doi:10.3969/j.issn.1671-6833.2013.06.017]
点击复制

不同支承体系曲线梁桥的受力性能研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
34
期数:
2013年06期
页码:
67-71
栏目:
出版日期:
2013-12-30

文章信息/Info

Title:
Study on Mechanical Properties of Curved Girder Bridgewith Different Supporting Systems
作者:
李广慧; 袁波.
郑州航空工业管理学院土建学院,河南郑州,450015, 中国建筑东北设计研究院有限公司,辽宁沈阳,110003
Author(s):
Ll Guang-hui’ ; YUAN Bo2
1.school of Civil Engineering, Zhengzhou Institute of Aeronautical Industry Management , Zhengzhou 450015，China;2.ChinaNortheast Architectural Design and Research Institute Co. ,Ltd，Shenyang 110006，China
关键词:
曲线梁桥;  受力性能;  支承体系
Keywords:
curved girder bridge ;  mechanical property ;  supporting system
分类号:
Tu445.7
DOI:
10.3969/j.issn.1671-6833.2013.06.017
文献标志码:
A
摘要:
针对一曲线连续箱梁桥,分别设计了全抗扭跨支承和两端抗扭、中间跨独柱墩支承两种方案,从弯矩、剪力、扭矩和支座反力等方面对比分析了各自的受力特点;对独柱墩支承形式还设计了支座偏心,以进一步探讨独柱墩曲线梁桥的受力性能.结果表明,通过设置支座偏心,可以在很大程度上克服两端抗扭、中间跨独柱墩支承曲线梁桥的缺点,其受力性能可以满足工程应用要求.
Abstract:
With regard to a curved continuous bridge with box girder ， two supporting systems were respectivelydesigned，namely ，torsion-resist supports at all supports and torsion-resist supports only at both end supports ,single supports at all middle span supports，and comparative analysis has been conducted on their mechanicalproperties from moment，shear forces，torque and support reaction forces. Bearing eccentricity has been takeninto consideration in this paper，in order to investigate the mechanical properties of curved girder bridge withsingle supports at all middle spans further. Calculation results show that if applicable bearing eccentricity is setup， the disadvantages of curved girder bridge with single supports at all middle spans could be overcome，andits mechanical properties can still meet the requirements of engineering application.

参考文献/References:

[1]冯芪,李会驰,赵君黎．公路桥梁独柱墩结构安全风险综述[J]．公路交通科技:应用技术版,2011( 12): 17 -21.\

[2]宫平,青金彪．深圳某立交N4匝道桥梁体转动分析和加固分析[J].特种结构,2001,18( 4):67 -68.

相似文献/References:

[1]刘立新,王利平,于秋波,等.GRC异形内模预应力箱梁受力性能的试验研究[J].郑州大学学报(工学版),2006,27(04):10.[doi:10.3969/j.issn.1671-6833.2006.04.003]
　LIU Lixin,WANG Liping,YU Qiubo,et al.Experimental study on the stress performance of GRC special-shaped inner mold prestressed box girder [J].Journal of Zhengzhou University (Engineering Science),2006,27(06):10.[doi:10.3969/j.issn.1671-6833.2006.04.003]
[2]童丽萍,王彦超..大跨预应力混凝土楼盖结构选型研究[J].郑州大学学报(工学版),2005,26(01):24.[doi:10.3969/j.issn.1671-6833.2005.01.007]
　Tong Liping,Wang Yanchao.Study on the selection of large-span prestressed concrete building structure[J].Journal of Zhengzhou University (Engineering Science),2005,26(06):24.[doi:10.3969/j.issn.1671-6833.2005.01.007]

更新日期/Last Update: 1900-01-01