[1]刘军,赵东辉,张慧,等.基于虚拟制造技术的增压机模型分析及仿真[J].郑州大学学报(工学版),2006,27(02):120-123.[doi:10.3969/j.issn.1671-6833.2006.02.031]
　LIU Jun,ZHAO Donghui,ZHANG Hui,et al.Booster model analysis and simulation based on virtual manufacturing technology[J].Journal of Zhengzhou University (Engineering Science),2006,27(02):120-123.[doi:10.3969/j.issn.1671-6833.2006.02.031]

点击复制

基于虚拟制造技术的增压机模型分析及仿真()

分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:

27

期数:

2006年02期

页码:

120-123

栏目:

出版日期:

1900-01-01

文章信息/Info

Title:

Booster model analysis and simulation based on virtual manufacturing technology

作者:

刘军; 赵东辉; 张慧; 等.

河南农业大学机电工程学院,河南,郑州,450002, 河南农业大学机电工程学院,河南,郑州,450002, 河南农业大学机电工程学院,河南,郑州,450002, 河南农业大学机电工程学院,河南,郑州,450002

Author(s):

LIU Jun; ZHAO Donghui; ZHANG Hui; etc

关键词:

增压机;  运动仿真;  虚拟制造

Keywords:

Booster;  motion simulation;  Virtual manufacturing

DOI:

10.3969/j.issn.1671-6833.2006.02.031

文献标志码:

A

摘要:

采用Pro/Engineer建立增压机工作装置参数化实体模型,以此为基础,建立运动学模型,对工作装置进行运动仿真.首先将模型的连杆部分导入Ansys分析软件进行有限元受力分析,然后将活塞和连杆部分通过Pro/E和Adams之间的无缝接口软件Mechanical/Pro导入Adams软件中进行动力学分析,得出其在多种情况下的运动曲线,各项数据基本上达到了实际的要求.

Abstract:

Pro/Engineer is used to establish the parametric solid model of the working device of the supercharger, and on this basis, the kinematics model is established to simulate the motion of the working device. First, the connecting rod part of the model is imported into Ansys analysis software for finite element force analysis, and then the piston and connecting rod part are imported into Adams software through the seamless interface software Mechanical/Pro between Pro/E and Adams for dynamic analysis, and their motion curves in various situations are obtained, and the data basically meet the actual requirements.

常用功能