[1]高琳,赖雅琳..提升机的弹性托货机构设计[J].郑州大学学报(工学版),2006,27(01):95-97.[doi:10.3969/j.issn.1671-6833.2006.01.023]
 Gao Lin,Lai Yalin.Elastic cargo mechanism design of hoist[J].Journal of Zhengzhou University (Engineering Science),2006,27(01):95-97.[doi:10.3969/j.issn.1671-6833.2006.01.023]
点击复制

提升机的弹性托货机构设计()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
27
期数:
2006年01期
页码:
95-97
栏目:
出版日期:
1900-01-01

文章信息/Info

Title:

Elastic cargo mechanism design of hoist
作者:
高琳赖雅琳.
郑州大学机械工程学院,河南,郑州,450052, 华侨大学机电及自动化学院,福建,泉州,362011
Author(s):
Gao Lin; Lai Yalin
关键词:
弹性托货机构 碟簧 惯性冲击能量
Keywords:
DOI:
10.3969/j.issn.1671-6833.2006.01.023
文献标志码:
A
摘要:
托货机构是提升机的关键机构,如果要求货物高速提升和高度位置精度,托货机构必须弹性化以实现和货物的软结合,缓冲货物提升到位时的冲击力.采用弹性垂直托货机构(碟簧式),对该机构进行设计计算和结构设计,并对提升机的特殊故障进行了冲击校核.结果表明该机构已通过了全方位的实验,并被应用于军用产品中.
Abstract:
The cargo holding mechanism is the key mechanism of the hoist, if the goods are required to be lifted at high speed and high position accuracy, the cargo holding mechanism must be flexible to achieve a soft combination with the goods and buffer the impact force when the goods are lifted into place. The elastic vertical cargo mechanism (disc spring type) was adopted to carry out design calculation and structural design of the mechanism, and the impact check was carried out for the special fault of the hoist. The results show that the agency has passed a full range of experiments and is being applied to military products.

相似文献/References:

[1]任志英,邱 涛,刘扭扭,等.推进轴系纵向高承载准零刚度隔振器的研究[J].郑州大学学报(工学版),2023,44(01):52.[doi:10.13705/j.issn.1671-6833.2022.04.019]
 REN Zhiying,QIU Tao,LIU Niuniu,et al.Research on Longitudinal High Load-bearing Quasi-zero Stiffness Isolator for Propulsion Shafting[J].Journal of Zhengzhou University (Engineering Science),2023,44(01):52.[doi:10.13705/j.issn.1671-6833.2022.04.019]

更新日期/Last Update: 1900-01-01