[1]白晓丽,王亚明,李倩,等.用DSC评价PET/粘土纳米复合材料的结晶性能[J].郑州大学学报(工学版),2002,23(3):91-93.[doi:10.3969/j.issn.1671-6833.2002.03.025]
　Bai Xiaoli,Wang Yaming,LI Qian,et al.The crystallization properties of PET/clay nanocomposites were evaluated by DSC[J].Journal of Zhengzhou University (Engineering Science),2002,23(3):91-93.[doi:10.3969/j.issn.1671-6833.2002.03.025]

点击复制

用DSC评价PET/粘土纳米复合材料的结晶性能()

分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:

23

期数:

2002年3期

页码:

91-93

栏目:

出版日期:

1900-01-01

文章信息/Info

Title:

The crystallization properties of PET/clay nanocomposites were evaluated by DSC

作者:

白晓丽,王亚明,李倩,等.

郑州大学橡塑模具国家工程研究中心,河南,郑州,450002, 郑州大学橡塑模具国家工程研究中心,河南,郑州,450002, 郑州大学橡塑模具国家工程研究中心,河南,郑州,450002, 郑州大学橡塑模具国家工程研究中心,河南,郑州,450002

Author(s):

Bai Xiaoli; Wang Yaming; LI Qian; etc

关键词:

差示扫描量热法;  聚对苯二甲酸乙二醇酯;  粘土;  纳米 复合材料;  结晶

Keywords:

differential scanning calorimetry;  Polyethylene terephthalate;  clay;  nano composites;  Crystallization

DOI:

10.3969/j.issn.1671-6833.2002.03.025

文献标志码:

A

摘要:

利用差示扫描量热法测试了PET,PET/粘土纳米复合材料、增粘PET/粘土纳米复合材料的一些结晶性能,对其冷结晶峰、过冷度和结晶温度范围分别进行对比,结果表明:PE T/粘土纳米复合材料的冷结晶起始温度较PET低;PET,PET/粘土纳米复合材料、增粘PET/粘土纳米复合材料相同条件下过冷度tm-t′m大小顺序为PET/粘土纳米复合材料<增粘 PET/粘土纳米复合材料增粘PET/粘土纳米复合材料>PET.这表明粘土纳米片层在PET中的分散

Abstract:

Some crystallization properties of PET, PET/clay nanocomposites and tackified PET/clay nanocomposites were tested by differential scanning calorimetry, and the cold crystallization peak, subcooling degree and crystallization temperature range were compared respectively, and the results showed that the cold crystallization starting temperature of PE T/clay nanocomposites was lower than that of PET. PET, PET/CLAY NANOCOMPOSITES, TACKIFIED PET/CLAY NANOCOMPOSITES UNDER THE SAME CONDITIONS OF SUBCOOLING TM-T′M SIZE ORDER IS PET/CLAY NANOCOMPOSITES<TACKIFIED PET/CLAY NANOCOMPOSITES TACKIFIED PET/CLAY NANOCOMPOSITES > PET. This indicates the dispersion of the clay nanosheet layer in PET

常用功能