[1]苗同臣,罗国军,朱明霞,等.钢结构节点角钢连接计算[J].郑州大学学报(工学版),2001,22(03):28-30.[doi:10.3969/j.issn.1671-6833.2001.03.008]
　Miao Tongchen,Luo Guojun,ZHU Mingxia,et al.Calculation of angle steel connection of steel structure joints[J].Journal of Zhengzhou University (Engineering Science),2001,22(03):28-30.[doi:10.3969/j.issn.1671-6833.2001.03.008]

点击复制

钢结构节点角钢连接计算()

分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:

22

期数:

2001年03期

页码:

28-30

栏目:

出版日期:

1900-01-01

文章信息/Info

Title:

Calculation of angle steel connection of steel structure joints

作者:

苗同臣; 罗国军; 朱明霞; 等.

郑州大学工程力学系,, 新郑卷烟厂基建处,, 郑州华电钢结构工程技术有限公司,

Author(s):

Miao Tongchen; Luo Guojun; ZHU Mingxia; etc

关键词:

钢结构;  角钢;  连接;  程序

Keywords:

Steel structure;  angle steel;  Connect;  Procedure

DOI:

10.3969/j.issn.1671-6833.2001.03.008

文献标志码:

A

摘要:

根据目前钢结构设计中常用的中国和美国规范,并结合实际工程设计特点,分析了钢结构节点角钢连接的设计方法,并编制了设计计算的计算机软件.该计算机软件在输入简单参数后能自动完成螺栓数量的计算、角钢型号的选择以及角钢长度的确定等.计算方法和程序已在工程实际中应用,计算结果准确合理,具有较高的实际应用价值.

Abstract:

According to the current Chinese and American specifications commonly used in steel structure design, and combined with the actual engineering design characteristics, the design method of angle steel connection of steel structure nodes is analyzed, and the computer software for design calculation is compiled. The computer software can automatically complete the calculation of the number of bolts, the selection of angle steel type and the determination of angle length after entering simple parameters. The calculation methods and procedures have been applied in engineering practice, and the calculation results are accurate and reasonable, which has high practical application value.

常用功能