[1]刘智奇,侯伯杰,周万春.提高数控仿形加工稳定性和精度的实用方法[J].郑州大学学报(工学版),1998,19(04):5-8.
　Liu Zhiqi,Hou Bijie,Zhou Wanchun.Practical methods to improve the stability and accuracy of CNC imitations and accuracy[J].Journal of Zhengzhou University (Engineering Science),1998,19(04):5-8.
点击复制

提高数控仿形加工稳定性和精度的实用方法()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
19卷
期数:
1998年04期
页码:
5-8
栏目:
出版日期:
1998-12-31

文章信息/Info

Title:
Practical methods to improve the stability and accuracy of CNC imitations and accuracy
作者:
刘智奇; 侯伯杰; 周万春
郑州工业大学机械与电子工程学院,中州大学
Author(s):
Liu Zhiqi;  Hou Bijie;  Zhou Wanchun
School of Mechanical and Electronic Engineering, Zhengzhou University of Technology, Zhongzhou University
关键词:
数控; 仿形加工; 稳定性
Keywords:
CNC;  imitation processing;  stability
文献标志码:
A
摘要:
分析了数控仿形运动的基本特征，指出了影响仿形加工稳定性和精度的主要因素，提出了两种实用的控制方法。实验证明，这两种控制方法有效地提高了数控仿形加工的稳定性和精度，同时也提高了数控仿形加工的效率。
Abstract:
The basic characteristics of the CNC imitation motion were analyzed, and the main factors affecting the stability and accuracy of imitation processing processing were pointed out, and two practical control methods were proposed. Experiments have shown that these two control methods effectively improve the stability and accuracy of CNC imitation processing, and also improve the efficiency of CNC imitation processing.

相似文献/References:

[1]张秀丽,刘武发,侯伯杰,等.大型扁绕机数控系统的研制[J].郑州大学学报(工学版),1999,20(04):95.[doi:10.3969/j.issn.1671-6833.1999.04.030]
　ZHANG Xiuli,LIU Wufa,Berger Hou,et al.Development of numerical control system for large-scale flat winding machine[J].Journal of Zhengzhou University (Engineering Science),1999,20(04):95.[doi:10.3969/j.issn.1671-6833.1999.04.030]

更新日期/Last Update: 1900-01-01