[1]黄仁贵,覃寿同,李大磊.定位误差的运动学解释及工件以回转面定位的定位基准[J].郑州大学学报(工学版),1997,18(02):61-66.
　Huang Rengui,Qin Shou Tong,Li Dalei.Sports interpretation of positioning errors and the positioning benchmark of the positioning of the workpiece with rotation faces positioning[J].Journal of Zhengzhou University (Engineering Science),1997,18(02):61-66.
点击复制

定位误差的运动学解释及工件以回转面定位的定位基准()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
18
期数:
1997年02期
页码:
61-66
栏目:
出版日期:
1997-07-29

文章信息/Info

Title:
Sports interpretation of positioning errors and the positioning benchmark of the positioning of the workpiece with rotation faces positioning
作者:
黄仁贵; 覃寿同; 李大磊
郑州工业大学机械系
Author(s):
Huang Rengui;  Qin Shou Tong;  Li Dalei
Department of Machinery Department of Zhengzhou University of Technology
关键词:
定位基准; 定位误差; 运动学
Keywords:
Positioning benchmark;  position error;  exercise science
文献标志码:
A
摘要:
本文阐明了当工件以回转面定位，计算定位误差时，取定位基准或为回转面某一母线，或为其中心线，计算结果是相同的。进而从运动学原理上对定位误差进行了解释。
Abstract:
This article clarifies that when the workpiece is located with a rotating surface and calculates the positioning error, take the positioning benchmark or is a bus to the reckle surface, or the center line, and the calculation results are the same. Then explain the positioning error from the principle of sports.

相似文献/References:

[1]梅盛开,李松,袁伟,等.基于样件测试法的五轴机床误差辨识方法[J].郑州大学学报(工学版),2021,42(01):94.[doi:10.13705/j.issn.1671-6833.2021.01.012]
　MEI Shengkai,LI Song,YUAN Wei,et al.Error Identification Method of Five-axis Machine Tool Based on Sample Test Method[J].Journal of Zhengzhou University (Engineering Science),2021,42(02):94.[doi:10.13705/j.issn.1671-6833.2021.01.012]
[2]李大磊,覃寿同,马胜钢,等.使用夹具加工工件时定位误差分析与计算探讨[J].郑州大学学报(工学版),1997,18(04):99.
　Li Dalei,Qin Shoutong,Ma Shenggang,et al.Analysis and calculation of the positioning error analysis and calculation of the positioning error when using the fixture[J].Journal of Zhengzhou University (Engineering Science),1997,18(02):99.

备注/Memo

备注/Memo:
作者
更新日期/Last Update: 1900-01-01