[1]杨明珊,汤亚力,沈宁福,等.快速凝固热强Al-4Ti-2V-3La合金的显微结构和力学性能的研究[J].郑州大学学报(工学版),1997,18(01):32-36.
　Yang Mingshan,Tang Yali,Shen Ningfu,et al.Research on the microstructure and mechanical performance of fast solidifying thermal AL-4TI-2V-3LA alloy[J].Journal of Zhengzhou University (Engineering Science),1997,18(01):32-36.
点击复制

快速凝固热强Al-4Ti-2V-3La合金的显微结构和力学性能的研究()
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
18
期数:
1997年01期
页码:
32-36
栏目:
出版日期:
1997-07-28

文章信息/Info

Title:
Research on the microstructure and mechanical performance of fast solidifying thermal AL-4TI-2V-3LA alloy
作者:
杨明珊; 汤亚力; 沈宁福; 刘晓芳
郑州工业大学学报
Author(s):
Yang Mingshan;  Tang Yali;  Shen Ningfu;  Liu Xiaofang
Journal of Zhengzhou University of Technology
关键词:
快速凝固; Al－4Ti－2V－3La合金; 显微结构; 力学性能
Keywords:
Quick solidification;  al -4Ti -2V -3LA alloy;  micro structure;  mechanical performance
文献标志码:
A
摘要:
采用金相（ＯＭ）、透射电镜（ＴＥＭ）、扫描电镜（ＳＥＭ）等先进技术研究了快速凝固Ａｌ－４Ｔｉ－２Ｖ－３Ｌａ合金，确定了基体中弥散分布的细小强化相为单一的Ａｌ２０（Ｔｉ，Ｖ）２Ｌａ相，结构为金刚石立方结构，晶格常数ａ＝１．４７ｎｍ。该性能接近当前较成熟的热强铝合金，说明快凝Ａｌ－Ｔｉ－Ｌａ基合金作为热强铝合金具有潜在的实力。
Abstract:
Advanced technologies such as gold phase (OM), transmitted electron microscope (TEM), scanning electron microscope (SEM) studied quickly solidified Al -4TI -2V -3LA alloys, and determined that the small enhancement of the scattered distribution in the substrate was a single AL20 (TI, V) 2LA phase. .47nm. This performance is close to the current mature thermal aluminum alloy, which shows that the fast -coagulans Al -TI -LA conformal alloy has potential strength as armal aluminum alloy.

相似文献/References:

[1]石广新,张国胜,关绍康,等.Ni20Zr10Al70非晶合金的制备技术及组织的研究[J].郑州大学学报(工学版),2004,25(04):49.[doi:10.3969/j.issn.1671-6833.2004.04.013]
　SHI Guangxin,Zhang Guosheng,Guan Shaokang,et al.Study on preparation technology and microstructure of Ni20Zr10Al70 amorphous alloy[J].Journal of Zhengzhou University (Engineering Science),2004,25(01):49.[doi:10.3969/j.issn.1671-6833.2004.04.013]
[2]任晨星,孙玉峰,汤亚力,等.快凝Al-Cr合金的显微结构与形核动力学[J].郑州大学学报(工学版),2002,23(03):87.[doi:10.3969/j.issn.1671-6833.2002.03.024]
　Ren Chenxing,SUN Yufeng,Tang Yali,et al.Microstructure and nucleation dynamics of fast-setting Al-Cr alloy[J].Journal of Zhengzhou University (Engineering Science),2002,23(01):87.[doi:10.3969/j.issn.1671-6833.2002.03.024]
[3]汤亚力,沈宁福,关绍康,等.快速凝固 Al-Fe 合金中准晶相的研究[J].郑州大学学报(工学版),1998,19(03):7.
　Tang Yali,Shen Ningfu,Guan Shaokang,et al.Research on quasi-crystalline phase in AL-FE alloys[J].Journal of Zhengzhou University (Engineering Science),1998,19(01):7.
[4]石广新,沈宁福,任晨星.常规和快速凝固Al－3．18Ti－0．65C合金中TiC相的形成机理[J].郑州大学学报(工学版),1996,17(01):13.
　Shi Guangxin,Shen Ningfu,Ren Chenxing.Conventional and fast solidification AL -3.18Ti -0.65c The formation mechanism of TIC phases in the alloy[J].Journal of Zhengzhou University (Engineering Science),1996,17(01):13.
[5]汤亚力,沈宁福,张东捷,等.Al—8Fe－3Ti急冷合金的组织稳定性[J].郑州大学学报(工学版),1995,16(01):88.
　Tang Yali,Shen Ningfu,Zhang Dongjie,et al.The tissue stability of AL -8FE -3TI -cold alloy[J].Journal of Zhengzhou University (Engineering Science),1995,16(01):88.
[6]汤亚力,沈宁福,邵国胜,等.用分析电子显微镜研究快速凝固A18Fe4Ce3Ti合金中的未知相[J].郑州大学学报(工学版),1991,12(04):58.
　Tang Yali,Shen Ningfu,Shao Guosheng,et al.Use an analytical electronic microscope to study the unknown phase in the A18FE4CE3TI alloy[J].Journal of Zhengzhou University (Engineering Science),1991,12(01):58.
[7]仝兴存,沈宁福.快速凝固Al-Si-Ti-Pb合金中Pb的沉淀特征[J].郑州大学学报(工学版),1990,11(03):1.
　Same Story,Shen Ningfu,Quickly solidify the precipitation characteristics of PB in PB in Al-Si-Ti-PB alloys[J].Journal of Zhengzhou University (Engineering Science),1990,11(01):1.

备注/Memo

备注/Memo:
作者
更新日期/Last Update: 1900-01-01