[1]苏玉,蒋元力,马国瑜,等.考虑稳定性的乳化液膜扩散传质模型及求解[J].郑州大学学报(工学版),1996,17(04):9-13.
　Su Yu,Jiang Yuanli,Ma Guoyu,et al.Consider stable emulsion film diffusion model and solve[J].Journal of Zhengzhou University (Engineering Science),1996,17(04):9-13.
点击复制

考虑稳定性的乳化液膜扩散传质模型及求解
分享到：

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
17
期数:
1996年04期
页码:
9-13
栏目:
出版日期:
1996-04-28

文章信息/Info

Title:
Consider stable emulsion film diffusion model and solve
作者:
苏玉; 蒋元力; 马国瑜; 傅举孚
中州大学计算机系，北京化工大学化工学院
Author(s):
Su Yu;  Jiang Yuanli;  Ma Guoyu;  Fu Jusu
Department of Computer Department of Zhongzhou University, School of Chemical Technology, Beijing University of Chemical Technology
关键词:
乳化液膜; 扩散传质; 模型; 求解
Keywords:
Emulsal liquid film;  diffusion;  model;  model;  solve
文献标志码:
A
摘要:
本文针对乳化液膜体系扩散传质模型的建立过程中所存在的问题，深入分析了影响液膜稳定性的溶胀、膜破裂等现象对传质过程所造成的影响。建立了综合反映渗透溶胀、膜破裂影响的扩散件质模型、这种数学模型与实际革取情况更为相符。采用了有限差分法对于该复杂模型进行求解。传质摸型中考虑了乳状液滴外相边界层、表面活性剂层对传质过程的阻力影响。计算结果与实验结果更为吻合，从而证明了所建模型的合理性。
Abstract:
This article targets the problems existing in the establishment of the emulsifier's fluid film system diffusion and transmission model, and in -depth analysis of the effects of inflation and membrane rupture that affects the stability of the liquid membrane on the process. Establishing a comprehensive reflecting the influenza and membrane rupture influence, the mathematical model, this mathematical model is more consistent with the actual leather. The limited difference method was used to solve the complex model. During the quality of the mass, the impact of the border layer and the surfactant layer of the emulsion of the emulsion droplets on the mass transfer process. The calculation results are more consistent with the experimental results, which proves the rationality of the model built.

相似文献/References:

[1]高广颖,蒋元力,黄强,等.考虑载体影响的液膜体系界面状态方程[J].郑州大学学报(工学版),1998,19(04):94.
　Gao Guangying,Jiang Yuanli,Huang Qiang,et al.Consider the liquid film system interface status equation that affects the carrier[J].Journal of Zhengzhou University (Engineering Science),1998,19(04):94.
[2]蒋元力,高广颖,吴增刚,等.采用 Lewis 槽对 W/O 乳状液与料液相界面间传质阻力的测定[J].郑州大学学报(工学版),1997,18(03):1.
　Jiang Yuanli,Gao Guangying,Wu Zenggang,et al.Use the Lewis slot to determine the resistance of the quality of the quality of the W/O Creasurra and the material of the aggregate solution[J].Journal of Zhengzhou University (Engineering Science),1997,18(04):1.

更新日期/Last Update: 1900-01-01