[1]石广新,沈宁福,任晨星.常规和快速凝固Al-3.18Ti-0.65C合金中TiC相的形成机理[J].郑州大学学报(工学版),1996,17(01):13-15.
 Shi Guangxin,Shen Ningfu,Ren Chenxing.Conventional and fast solidification AL -3.18Ti -0.65c The formation mechanism of TIC phases in the alloy[J].Journal of Zhengzhou University (Engineering Science),1996,17(01):13-15.
点击复制

常规和快速凝固Al-3.18Ti-0.65C合金中TiC相的形成机理()
分享到:

《郑州大学学报(工学版)》[ISSN:1671-6833/CN:41-1339/T]

卷:
17
期数:
1996年01期
页码:
13-15
栏目:
出版日期:
1996-01-28

文章信息/Info

Title:
Conventional and fast solidification AL -3.18Ti -0.65c The formation mechanism of TIC phases in the alloy
作者:
石广新沈宁福任晨星
郑州工学院材料研究中心
Author(s):
Shi Guangxin Shen Ningfu Ren Chenxing
Zhengzhou Institute of Technology Material Research Center
关键词:
快速凝固TiC相热力学分析
Keywords:
Quick solidification TIC phase thermodynamics analysis
文献标志码:
A
摘要:
采用快速凝固技术在AL-3.18Ti-0.65C合金(Wt%)合金中获得了是弥散分布的TiC相颗粒.结合常规和快速凝固组织的分析对比,研究和探讨了相的形成过程和机制;快凝技术为研制AL/TiC自生复合材料开辟了新的途径.
Abstract:
The rapid solidification technology was obtained in Al -3.18TI -0.65C alloy (WT %) alloy. Combined with the analysis of conventional and fast solidification organizations, it has studied and discussed the formation process and mechanism of phase; fast -coagulative technology has opened up new ways for the development of Al / TIC self -lifting composite materials.

相似文献/References:

[1]石广新,张国胜,关绍康,等.Ni20Zr10Al70非晶合金的制备技术及组织的研究[J].郑州大学学报(工学版),2004,25(04):49.[doi:10.3969/j.issn.1671-6833.2004.04.013]
 SHI Guangxin,Zhang Guosheng,Guan Shaokang,et al.Study on preparation technology and microstructure of Ni20Zr10Al70 amorphous alloy[J].Journal of Zhengzhou University (Engineering Science),2004,25(01):49.[doi:10.3969/j.issn.1671-6833.2004.04.013]
[2]任晨星,孙玉峰,汤亚力,等.快凝Al-Cr合金的显微结构与形核动力学[J].郑州大学学报(工学版),2002,23(03):87.[doi:10.3969/j.issn.1671-6833.2002.03.024]
 Ren Chenxing,SUN Yufeng,Tang Yali,et al.Microstructure and nucleation dynamics of fast-setting Al-Cr alloy[J].Journal of Zhengzhou University (Engineering Science),2002,23(01):87.[doi:10.3969/j.issn.1671-6833.2002.03.024]
[3]汤亚力,沈宁福,关绍康,等.快速凝固 Al-Fe 合金中准晶相的研究[J].郑州大学学报(工学版),1998,19(03):7.
 Tang Yali,Shen Ningfu,Guan Shaokang,et al.Research on quasi-crystalline phase in AL-FE alloys[J].Journal of Zhengzhou University (Engineering Science),1998,19(01):7.
[4]杨明珊,汤亚力,沈宁福,等.快速凝固热强Al-4Ti-2V-3La合金的显微结构和力学性能的研究[J].郑州大学学报(工学版),1997,18(01):32.
 Yang Mingshan,Tang Yali,Shen Ningfu,et al.Research on the microstructure and mechanical performance of fast solidifying thermal AL-4TI-2V-3LA alloy[J].Journal of Zhengzhou University (Engineering Science),1997,18(01):32.
[5]汤亚力,沈宁福,张东捷,等.Al—8Fe-3Ti急冷合金的组织稳定性[J].郑州大学学报(工学版),1995,16(01):88.
 Tang Yali,Shen Ningfu,Zhang Dongjie,et al.The tissue stability of AL -8FE -3TI -cold alloy[J].Journal of Zhengzhou University (Engineering Science),1995,16(01):88.
[6]汤亚力,沈宁福,邵国胜,等.用分析电子显微镜研究快速凝固A18Fe4Ce3Ti合金中的未知相[J].郑州大学学报(工学版),1991,12(04):58.
 Tang Yali,Shen Ningfu,Shao Guosheng,et al.Use an analytical electronic microscope to study the unknown phase in the A18FE4CE3TI alloy[J].Journal of Zhengzhou University (Engineering Science),1991,12(01):58.
[7]仝兴存,沈宁福.快速凝固Al-Si-Ti-Pb合金中Pb的沉淀特征[J].郑州大学学报(工学版),1990,11(03):1.
 Same Story,Shen Ningfu,Quickly solidify the precipitation characteristics of PB in PB in Al-Si-Ti-PB alloys[J].Journal of Zhengzhou University (Engineering Science),1990,11(01):1.

更新日期/Last Update: 1900-01-01