相似文献/References:
[1]吴素珍,何卫东.RV针摆传动齿面接触强度非线性分析[J].郑州大学学报(工学版),2015,36(04):100.[doi:10.3969/ j.issn.1671 -6833.2015.04.023]
WU Su-zhen,HE Wei-dong.On the Nonlinear Analysis of Contact Strength of Cycloid-pinGear Transmission Surface[J].Journal of Zhengzhou University (Engineering Science),2015,36(04):100.[doi:10.3969/ j.issn.1671 -6833.2015.04.023]
[2]李宇.大跨连续梁桥施工膺架的设计研究[J].郑州大学学报(工学版),2016,37(02):77.[doi:10.3969/j.issn.1671-6833.201505033]
Li Yu.Research on Optimization Design for Constructive Rack of Long-span continuous beam bridge[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):77.[doi:10.3969/j.issn.1671-6833.201505033]
[3]闫安志,陶天增,张振华.端部质量对有无损伤悬臂梁的模态影响分析[J].郑州大学学报(工学版),2016,37(05):39.[doi:10.13705/j.issn.1671-6833.2016.05.008]
Yan Anzhi,Tao Tianzeng,Zhang Zhenhua.The mode analysis of the cantilever beam with concentrated mass on its free end in the case of with and without damage[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):39.[doi:10.13705/j.issn.1671-6833.2016.05.008]
[4]朱强,杜鹏,王建军,等.特殊螺纹套管接头柱面/球面密封结构有限元分析[J].郑州大学学报(工学版),2016,37(05):82.[doi:10.13705/j.issn.1671-6833.2016.05.016]
Zhu Qiang,Du Peng,Wang Jianjun,et al.Sealability Analysis of Premium Connection with Cylinder/Sphere Sealing Structure Based on FEM[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):82.[doi:10.13705/j.issn.1671-6833.2016.05.016]
[5]王衡,陈廷国.基于数值计算的矩形孔蜂窝梁应力分布规律研究[J].郑州大学学报(工学版),2016,37(06):58.[doi:10.13705/j.issn.1671-6833.2016.03.029]
Wang Heng,Chen Tingguo.Research on the Stress Distribution of Rectangular Hole Castellated Beams based on Numerical Calculation[J].Journal of Zhengzhou University (Engineering Science),2016,37(04):58.[doi:10.13705/j.issn.1671-6833.2016.03.029]
[6]张猛,张玉莹,赵桂峰,等.考虑温度场的架空钢芯铝绞线线股应力研究[J].郑州大学学报(工学版),2018,39(04):7.[doi:1013705/j.issn.1671-68332018.01031]
Zhang Meng,Zhang Yuying,Zhao Guifeng,et al.Study on Stress of Overhead Steel Core A luminum Wire Strand Considering the Effect of Temperature Field.[J].Journal of Zhengzhou University (Engineering Science),2018,39(04):7.[doi:1013705/j.issn.1671-68332018.01031]
[7]李通、时强、王新武、叶重阳.耗能梁段腹板开孔对偏心支撑钢框架抗震性能影响[J].郑州大学学报(工学版),2021,42(02):38.[doi:10.13705/j.issn.1671-6833.2021.02.011]
Li Tong,Shiqiang,Wang Xinwu,et al.Influence of Web Openings of Link on Seismic Behavior of Eccentrically Braced Steel Frames[J].Journal of Zhengzhou University (Engineering Science),2021,42(04):38.[doi:10.13705/j.issn.1671-6833.2021.02.011]
[8]高丹盈,杨素娟,李占松,等.南水北调大沙河渠道排水非稳定渗流计算分析[J].郑州大学学报(工学版),2010,31(05):27.[doi:10.3969/j.issn.1671-6833.2010.05.007]
[9]申长雨,黄明,赵振峰,等.改进的Allman无零能模式平面三角形单元[J].郑州大学学报(工学版),2005,26(01):13.[doi:10.3969/j.issn.1671-6833.2005.01.004]
Shen Changyu,HUANG Ming,ZHAO Zhenfeng,et al.Improved Allman-free zero-energy mode planar triangle element[J].Journal of Zhengzhou University (Engineering Science),2005,26(04):13.[doi:10.3969/j.issn.1671-6833.2005.01.004]
[10]胡良明,王涛,王宗敏,等.小浪底1号进水塔弧门段局部细化应力分析[J].郑州大学学报(工学版),2003,24(04):72.[doi:10.3969/j.issn.1671-6833.2003.04.017]
HU Liangming,Wang Tao,WANG Zongmin,et al.Local refinement stress analysis of arc door section of Xiaolangdi No. 1 inlet tower[J].Journal of Zhengzhou University (Engineering Science),2003,24(04):72.[doi:10.3969/j.issn.1671-6833.2003.04.017]
[11]胡良明,董跃星,周鸿钧.小浪底水利枢纽3号进水塔架的静动力分析[J].郑州大学学报(工学版),1998,19(04):13.
Hu Liangming,Dong Yuexing,Zhou Hongjun.Analysis of the static power of the water conservancy hub 3 of the small wave bottom 3[J].Journal of Zhengzhou University (Engineering Science),1998,19(04):13.